Welcome! Need support, you got it. Or share you ideas and experiences.
In Reply to: Bluewater 25, More Info...? posted by Thom V on March 23, 2002 at 10:22:54:
I just stumbled upon this site through one of my 6 monthly searches for the Bluewater 25 on Google and this is the first hit I have had since I started looking in the early 1990's. I thought I was the only one who had heard of this boat.
I called up Hayden Knibbs immediately after reading the Classic Boat article and asked to buy a set of plans for the Bluewater 25. He agreed and we met at Gatwick airport in December 1990 on my next periodic trip through the UK. And there, for the princely sum of £90 I acquired a set of 4 very nice working drawings.
Unfortunately I did not have the time to take Hayden up on his offer of a trial sail. This is very unfortunate as in 10 years of studying the plans there are a few items that I would like to have seen in the flesh. I did try and contact Hayden at the Fordingbridge address about 5-6 years ago but he had moved on an remains untraceable. If he reads this I would like him to get in touch with me as I am still going through the UK on a regular basis.
Anyway back to the boat. After producing only a few examples of the type Hayden apparently sold the rights to the design to Trade Wind Yachts. Their designer, John Rock, modified the hull by adding 5" to the topsides for extra headroom apparently (all 5" on the top strake by the look of it). Trade Wind Yachts now market her as the fibreglass Trade Wind 25 Atol. To see this incarnation go to the Trade Wind website at http://www.maritime.co.uk/tradewind/tw25.htm
There can't have been too much wrong with the original design as the interior layout and deck arrangement is virtually the same as Hayden's but they have changed the rig from a yawl to a cutter and reduced the bowsprit. Unfortnately the new rig looks very pedestrian. It doesn't look anywhere near as striking as the original althugh the yawl is probably my least favourite rig. I would like to see her fitted with a rig designed by Paul Gartside who designs absolute masterpieces in a similar style.
Although I have not yet built the boat I still have the plans on my wall at home together with a well thumbed Classic boat article, a set of study plans and a couple of letters from Hayden outlining costs of various stages of completion and, I believe, a materials list. In the interveaning years I have had to survive with the use of a TopHat25 sloop and currently own a 23' Norwalk Island Sharpie. The good news is that construction of the Bluewater 25 has recently been advanced to the front burner awaiting the departure of my 16 year old from the family home to free up the capital to enable me to start.
I hope this has provided you with enough to think about and when I finish the boat I will be sure and post some photo's here.
Re the website listed for info on the tradewind 25 (ex Bluewater 25) yachts
The original site I gave was a charter site which does have more and nicer pics of the boats than the manufacturers website.
Tradewind yachts is in fact HERE: http://tradewindyachts.co.uk/
Interestingly enough the Bluewater 25 formula appears to be particularly successful as the company is now constructing a stretched version, a 32 footer to an almost identical recipe.
regards, Scott T
Thanks for your diligent work! Yes, the Tradewind 'Atoll' appears to be the same basic design as the Bluewater 25 except in 'glass.
Yes I discovered all this while looking for Hayden Knibbs back in the mid 90's.
Someone in Stuckton told me that he had sold the Bluewater 25 design to Tradewind yachts and may have gone to work for them, so I rang Tradewind and asked for his whereabouts. They coud give no information regards his location, but during the discussion the person admitted that the Atoll was in fact the Bluewater 25 and the design had been bought from Hayden. Subsequently John Rock, the resident designer and the creater of the earlier Tradewinds, altered the design by the simple expedient of adding 5" to the freeboard by enlarging the topmost strake. This was achieved while leaving the rest of the design basically untouched right down to its multichine hull. I believe they also increased the balast but I would have to check my design plans to be sure.
Tradewind have subsequently taken the design and stretched it to 32ft but maintained the identical look in the new Tradewind Islander. Only one of these has been built that I know of and it is a really lovely looking boat. This vessel is to be seen at http://tradewindyachts.co.uk/tradewind_islander.htm. Unfortunately the Tradewind website is not well constructed and if you come in through the"front door" the 25' Atol is the only boat you will see mentioned. If you use the link above (and below) it will take you directly to the Islander page which is not otherwise mentioned or linked to. Strange really and a lesson for all you webmasters out there.
ciao Scott T
Hi from the UK,
You might like to know that 12 Tradewind 25 (Atolls) have been produced in the UK. All the hulls were moulded by a company called Blondecell Marine, who also fitted out most of them.
My wife and I own the last to have been produced, some 4 years ago. She was fitted out by a small, but growing, company called: M & B Yachts, based in Poole, Dorset. Our boat, "Chione T", was being constructed alongside the Tradewind Islander, also a product of M&B's handiwork. I say 'the Islander' since she is still the only example of her kind yet to be produced.
For much more info on the Tradewind Atoll than you will find on Tradewind Yacht's web site, try this: http://www.Johnson-UK.info
Should you need any further info, please email directly at firstname.lastname@example.org.
All the Best,
Thanks for your information and update! Yes, If you go ahead with the construcion of this vessel please do update us on your progress (go ahead and create a new post at the top of the message board).
If you create a record of the construction, we would be happy to post a 'story' (or photo essay), with pics, on the SBF Boat Adventures page!
Thanks for your efforts here, Moderator SBF: Thom V
The link I placed at the bottom of the previous note appears to have a problem or some difficulty connecting from this newsgroups location. Manually cut and paste the identical link which is in the the body of the note into your browser and it should connect fine.
This post is made possible by the generous support of people like you and our sponsors: