Welcome! Need support, you got it. Or share you ideas and experiences.
69.67.234.16
'); } // End --> |
a friend accidently took off the lower unit on my sears gamefisher 5.0hp. now i cant get it back on. can really use the help if anyone knows. i'm really missin' alot of fishin' thanks.
![]()
Follow Ups:
thank you guys ive got it up and running.
![]()
put the lower unit in gear and turn propeller while trying to insert shaft making sure that water pump tube is also lined up.by turning the prop it will eventually let the splines line up on shaft and motor shaft receiver.do not force .the lower unit should slide easily into the shaft up to a point of about a 1/4 inch . then you can take a block of wood and a hammer and tap gently.this should finish letting the shaft enter the receiver.
![]()
Is the shaft still in the gearcase or did it pull out?
![]()
shaft pulled out of the gear case. any help much appreciated.
![]()
There is a pinion gear in the gearcase that the shaft seats in. It is tricky to do. Just keep trying to line up the little gear by moving the gearcase around, at the same time insert the shaft. You may have to spin the shaft one way or the other to line up the splines. Good luck!
![]()
| ||||||||||||
|
This post is made possible by the generous support of people like you and our sponsors: