Welcome! Need support, you got it. Or share you ideas and experiences.
In Reply to: drain hole busted posted by email@example.com on May 27, 2003 at 11:32:33:
Once upon a time, I extended the sides of a 8' Jon boat up and in to make it less likely to swamp. I used wire screen, riveted to the gunnels and covered it with fiberglass cloth and glass epoxy. I sanded a strip of paint off of the aluminum hull and let the epoxy contact the hull just below the original gunnel. I was surprised at how well the glass epoxy bonded to the aluminum.
Though I've not ever patched a hole in aluminum with fiberglass, I believe it would work. If you can find a small piece of aluminum near the same gauge as your hull, cover the hole from the inside with aluminum, using pop-rivets, then coat both sides (after sanding to bare aluminum) with fiberglass cloth and glass epoxy, repaint and be on your way.
This post is made possible by the generous support of people like you and our sponsors: