|
Small Boat Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
|
|
Small Boat Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
In Reply to: Re: idle and low speed problems posted by KenOhki on February 27, 2003 at 23:17:53:
Sounds like you need to tinker with the idle mixture screw.It is located on the side or bottom of the carb depending on the model. It will be a small brass screw with a spring around the shaft of the screw. proper adjustment is as follows. with engine idling, gently turn screw inward very slowly. If engine runs rougher, turn the screw the other way do this very slowly til the engine runs smooth. Also bear in mind that some two strokes will simply not idle smoothly at very low speeds.
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: idle and low speed problems - Tailgunner 15:26:06 03/01/03 (5)
- Re: idle and low speed problems - KenOhki 16:29:58 03/01/03 (4)
- Re: idle and low speed problems - Tailgunner 16:42:55 03/01/03 (3)
- Re: idle and low speed problems - KenOhki 15:21:24 03/02/03 (2)
- Re: idle and low speed problems - machnumber2 15:17:27 03/03/03 (1)
- Re: idle and low speed problems - KenOhki 23:12:08 03/03/03 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
