|
Small Boat Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
|
|
Small Boat Forum Welcome! Need support, you got it. Or share you ideas and experiences. |
|
In Reply to: Dory Advice posted by MrBill on October 7, 2004 at 07:40:34:
Hello Mr. BillRowing dories, so many -- so little time… Of course you have John Gardner’s The Dory Book a definitive on the history, building and designs of dories.
What first comes to mind is Paul Butler’s ‘Alaska Dory’ designed in the 80’s or 90’s for "Outdoor Life". She is a big double ender almost 20 feet in length with a 5’ 7†beam, weighing in at about 325 lbs. Based on an expanded version of John Gardner’s Gunning Dory she can carry an immense load, is built of plywood, but is not a speedy rower.
Next is the Hammond 16-foot Swampscott Dory from John Gardner’s Book. This design has a lot of the ‘right stuff’ and is an excellent rower. A couple of dories based on this design have rowed from Seattle to Alaska (look for the book "Row to Alaska by Wind and Oar" by Pete & Nancy Ashenfelter) One could expand the stations by a few inches each and stretch the length to about 18’ and actually gain some boat speed.
The Surf Dory type may not be the best choice for a rowing vessel. Though it has the looks and can carry a large load, it does not have enough carry between strokes especially into a breeze with those high ends… It’s a burdensome boat, not as svelte as needed for a rowing vessel.
A compromise to all this might be the design above “Youkou-Lili†from the French designer Francois Vivier. Here is a sweet small boat inspired by the double ended faerings of Norway and the American Swampscott dory. Her narrow bottom and rounded sides giving a fine sea boat for rowing. I would build it with the centerboard and the rudder saving the mast and sail for last. With the rudder, a person can captain the boat while a pair row. If a breeze springs up pushing one off course the centerboard can be dropped a bit to help keep the boat from drifting to much to leeward. She is built of plywood. Her Specs: LOA 18’ 5â€, Beam at Sheer 4’ 8â€. More info: www.francois.vivier.info
Anybody know of any Dory Kits out there?
Thom V
This post is made possible by the generous support of people like you and our sponsors:
Follow Ups
- Re: Dory Advice - ThomV 16:24:49 10/08/04 (3)
- Re: Dory Advice - MrBill 19:22:56 10/09/04 (2)
- Re: Dory Advice - Thom V 17:41:46 10/10/04 (1)
- Re: Dory Advice - MrBill 08:20:50 10/12/04 (0)
Top of Page ]
[ Contact Us ]
[ Support/Wish List ]
[ Copyright © 2024, Audio Asylum, all rights reserved ]
