Home Small Boat Forum

Welcome! Need support, you got it. Or share you ideas and experiences.

Re: cannot reseat the lower unit on sears gamefisher 5.0hp

139.55.11.158

put the lower unit in gear and turn propeller while trying to insert shaft making sure that water pump tube is also lined up.by turning the prop it will eventually let the splines line up on shaft and motor shaft receiver.do not force .the lower unit should slide easily into the shaft up to a point of about a 1/4 inch . then you can take a block of wood and a hammer and tap gently.this should finish letting the shaft enter the receiver.


This post is made possible by the generous support of people like you and our sponsors:
  Signature Sound   [ Signature Sound Lounge ]


Follow Ups Full Thread
Follow Ups
  • Re: cannot reseat the lower unit on sears gamefisher 5.0hp - cajunbearbass 13:47:51 10/09/05 (0)

FAQ

Post a Message!

Forgot Password?
Moniker (Username):
Password (Optional):
  Remember my Moniker & Password  (What's this?)    Eat Me
E-Mail (Optional):
Subject:
Message:   (Posts are subject to Content Rules)
Optional Link URL:
Optional Link Title:
Optional Image URL:
Upload Image:
E-mail Replies:  Automagically notify you when someone responds.