Small Boat Forum

Welcome! Need support, you got it. Or share you ideas and experiences.

Return to Small Boat Forum


Message Sort: Post Order or Asylum Reverse Threaded

cannot reseat the lower unit on sears gamefisher 5.0hp

69.67.234.16

Posted on August 15, 2005 at 08:08:50
a friend accidently took off the lower unit on my sears gamefisher 5.0hp. now i cant get it back on. can really use the help if anyone knows. i'm really missin' alot of fishin' thanks.

 

Hide full thread outline!
    ...
Re: cannot reseat the lower unit on sears gamefisher 5.0hp, posted on August 20, 2005 at 19:39:05
fishindude
Audiophile

Posts: 35
Joined: March 23, 2004
Is the shaft still in the gearcase or did it pull out?

 

Re: cannot reseat the lower unit on sears gamefisher 5.0hp, posted on August 25, 2005 at 06:59:02
shaft pulled out of the gear case. any help much appreciated.

 

Re: cannot reseat the lower unit on sears gamefisher 5.0hp, posted on August 29, 2005 at 20:44:22
fishindude
Audiophile

Posts: 35
Joined: March 23, 2004
There is a pinion gear in the gearcase that the shaft seats in. It is tricky to do. Just keep trying to line up the little gear by moving the gearcase around, at the same time insert the shaft. You may have to spin the shaft one way or the other to line up the splines. Good luck!

 

Re: cannot reseat the lower unit on sears gamefisher 5.0hp, posted on October 9, 2005 at 13:47:51
put the lower unit in gear and turn propeller while trying to insert shaft making sure that water pump tube is also lined up.by turning the prop it will eventually let the splines line up on shaft and motor shaft receiver.do not force .the lower unit should slide easily into the shaft up to a point of about a 1/4 inch . then you can take a block of wood and a hammer and tap gently.this should finish letting the shaft enter the receiver.

 

Re: cannot reseat the lower unit on sears gamefisher 5.0hp, posted on April 18, 2006 at 04:41:00
thank you guys ive got it up and running.

 

Page processed in 0.016 seconds.