Welcome! Need support, you got it. Or share you ideas and experiences.
In Reply to: Re: Tohatsu / Nissan motors...& a bit more... posted by SBFTV on May 29, 2001 at 23:24:55:
Thank you for the guidance!
I have run the Whipray with a tiller 25 mercury for the better pqart of three years. Very shallow draft, 28 mph top speed, and very economical. I decided to do something radical and installed a small console, steering, binacle, and a 60 hp mercury. The weight of the new engine is 220 pounds, up from 112 for the 25. Anyway, the draft of the Whipray has been compromised more than I care to admit, and I would prefer a lighter motor. The 50 hp Tohatsu (without the new injection) weighs 153 pounds, and with your recomendation, and the blessing of several friends who spend alot of time in the Bahamas and swear that these motors never seem to break, I will go forward with the Tohatsu.
Thankyou again for your response!
Glad the posts were helpful... Say, when you make the change, from the 60hp Merc to the 50hp Tohatsu, on your Whipray, how about posting an update...? Would also like to hear how the boat handling changed from the 25 hp Merc Tiller Steered, to the 60hp Merc Console Piloted, to the final stage---(are their really final stages to this smal boat tinkering...???---'tis one of the attributes of this small boat 'thang'!) the 50hp Tohatsu. I know that on my mini Pacific City Dory, where the motor well brings the weights forward about a 1/3+ further than transom tiller steering, the ride is very comfortable and stable...
Here is the low down on the merc 60 upgrade? from the merc 25.
The whipray is a really wonderful tool, deadly quiet, a dream to pole, and as shallow draft a flats boat as has ever been produced. I have fished the flats 19 years and always wished I could find a boat like this one. The tiller 25, which I lived with for three years on two whiprays, is a super little motor. Very powerful for a 112 pound package. I just got the urge to try a little more...so that's why I went with the larger merc. I also refitted the boat at the factory with a small foam cored center console (12 pounds) and steering and binacle. You see I have fished with the South Florida Flats Anglers and I needed the ample rod storage the tiller boat provided, as the side console molded into the deck cap compromised the rod storage on the starboard side. This is one of the few whiprays with a small center console. the problem came about when I replaced the 112 pound 25 hp motor with the 220 pound 60 hp merc. It has a terrific hole shot, and you can cruise at 3300 rpm which used to be wide open throttle with the 25, but it is when the boat is at rest that I experience the second thoughts of the repower. You see I was used to a boat that had 4 inch draft with the motor, rigging, two anglers and all the gear. The shallow draft cappabilities have been compromised more than I care to live with with the heavy 60. Hence the search for a lighter motor with more hp than the merc 25.
I will keep you abreast of the motor swap when it happens, which should be in a few weeks...
This post is made possible by the generous support of people like you and our sponsors: