Home Small Boat Forum

Welcome! Need support, you got it. Or share you ideas and experiences.

Re: sealing a wooden jon-boat

65.217.41.174

You did not say whether or not we are are talking exposed grain or not I assume that we are. I would use several coats of clear laquer. First use a really good wood sealer, spray and sand several times. then use anywhere from 4 to 10 thin coats of clear laquer sanding lightly with 320 grit paper between coats. finishing with 600 grit then a final flat coat to finish. allowing plenty of time between coats for drying before sanding and applying next coat.


This post is made possible by the generous support of people like you and our sponsors:
  Schiit Audio  


Follow Ups Full Thread
Follow Ups
  • Re: sealing a wooden jon-boat - Tailgunner 20:05:03 08/08/02 (0)


You can not post to an archived thread.